7Z88_Plunger_Silo-1
Clean and Dry Plunger Video Demo
 

Clean & Dry Plunger

  

The Clean & Dry™ plunger helps keep your bathroom cleaner and more sanitary. Traditional plungers pick up germs and bacteria that can spread when dripped on floors or in cabinets. The Clean & Dry plunger head and pole is protected with NeverWet™ coating, which forms a protective shield around them that water cannot penetrate. It works like car wax, the water beads up and rolls off instantly.

  • Repels water, bacteria and other things
  • Won�t drip on your floors after use
  • Helps keep your floors cleaner and more sanitary
  • NOTE: The unique NeverWet� coating is affected by the natural oils in your skin, touching the protective coating may impact product performance.
  • Should you want to clean your plunger, bleach is recommended. Do not clean with soap as it will diminish the performance of the NeverWet� coating.
  • Not designed for some low-flow toilets with larger openings
shop now
 
Product Specifications    Where to Buy    Shop Rubbermaid.com
Clean & Dry Plunger
Clean & Dry Plunger : (#7Z88)
Size: 5.8” L x 5.8” W x 19.25” H
 
Available Colors
Red/Grey
Find an online retailer
Price: $12.99
Out of Stock.
Clean & Dry Plunger 2-Pack
Clean & Dry Plunger 2-Pack : (#1N54)
Size: 5.8” L x 5.8” W x 19.25” H
 
Available Colors
Red/Grey
Find an online retailer
Not sold online at Rubbermaid.com. Please check your local store for availability and price.
Clean & Dry Plunger is rated 1.8 out of 5 by 74.
Rated 1 out of 5 by from Good idea. Poor quality rubber and bad design for Water runs off the coating - great idea. The plunger rubber is so stiff that it stays in the deformed position once pushed. You have to remove it and rub against the bowl to get it to pop back into shape for the next push! Plus, its a sink plunger. This type is not the best for toilet bowls. Either way, its mostly useless. Used mine twice, it looks brand new but it is useless as a plunger. Makes a nice statue.
Date published: 2019-01-28
Rated 3 out of 5 by from Good idea. Wrong plunger type I have had this for a few years. Being water repellant is great, but it is the wrong plunger type for toilets. It is a sink or cup type plunger. For toilets, you need a flange plunger. It takes the proper knack to get this to work on toilets. If Rubbermaid made flange plungers out of this material, I would instantly buy 4 more (for each bathroom in the house). As it is, the other bathrooms have "normal" flange plungers.
Date published: 2018-10-12
Rated 1 out of 5 by from Terrible My husband came home with this and it's the worst thing ever! It makes no suction to the drain hole. Not only that but once you pres it down, you have to rub it against the sides of the toilet for the lip to reform to be able to plunge again. It does drip. Also look under the plunger and see all the black mold it collects. I plunged for 10 minutes and into a sweat and gave up. My husband did the same and after us both taking turns, it finally worked.
Date published: 2018-01-14
Rated 1 out of 5 by from Need to re-design the plunger. This product does not work on the newer lower volume toilets. There are plungers on the market with the two part design. This would be a great plunger with that design and the current dry formula.
Date published: 2017-06-10
Rated 1 out of 5 by from Terrible terrible plunger Barely works, plunger head gets jammed every single time requiring you to fix it by hand. And still hasn't unclogged any toilets. Do not buy !!!!
Date published: 2016-08-12
Rated 5 out of 5 by from Best plunger ever This product is the best ever.It screams out quality.best thing ever!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Date published: 2015-08-27
Rated 1 out of 5 by from Useless With a stopped-up toilet and no plunger, I bought this one, beautifully packaged, that turned out to be useless. It may stay clean and dry, but its bell is too flat and shallow, allowing for almost no movement of water when plunging. If it hadn't been packaged, I might have noticed that and not bought it.
Date published: 2015-04-21
Rated 1 out of 5 by from This plunger is worthless... I purchased this plunger yesterday. When I tried to use it, the plunger head would not function, when you push down, the head did not release, so there was not any suction.
Date published: 2015-03-24
  • y_2019, m_2, d_19, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_74
  • loc_en_US, sid_10001_30051_RP092048, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rubbermaid
Clean & Dry Plunger is rated 1.8 out of 5 by 74.
Rated 1 out of 5 by from Good idea. Poor quality rubber and bad design for Water runs off the coating - great idea. The plunger rubber is so stiff that it stays in the deformed position once pushed. You have to remove it and rub against the bowl to get it to pop back into shape for the next push! Plus, its a sink plunger. This type is not the best for toilet bowls. Either way, its mostly useless. Used mine twice, it looks brand new but it is useless as a plunger. Makes a nice statue.
Date published: 2019-01-28
Rated 3 out of 5 by from Good idea. Wrong plunger type I have had this for a few years. Being water repellant is great, but it is the wrong plunger type for toilets. It is a sink or cup type plunger. For toilets, you need a flange plunger. It takes the proper knack to get this to work on toilets. If Rubbermaid made flange plungers out of this material, I would instantly buy 4 more (for each bathroom in the house). As it is, the other bathrooms have "normal" flange plungers.
Date published: 2018-10-12
Rated 1 out of 5 by from Terrible My husband came home with this and it's the worst thing ever! It makes no suction to the drain hole. Not only that but once you pres it down, you have to rub it against the sides of the toilet for the lip to reform to be able to plunge again. It does drip. Also look under the plunger and see all the black mold it collects. I plunged for 10 minutes and into a sweat and gave up. My husband did the same and after us both taking turns, it finally worked.
Date published: 2018-01-14
Rated 1 out of 5 by from Need to re-design the plunger. This product does not work on the newer lower volume toilets. There are plungers on the market with the two part design. This would be a great plunger with that design and the current dry formula.
Date published: 2017-06-10
Rated 1 out of 5 by from Terrible terrible plunger Barely works, plunger head gets jammed every single time requiring you to fix it by hand. And still hasn't unclogged any toilets. Do not buy !!!!
Date published: 2016-08-12
Rated 5 out of 5 by from Best plunger ever This product is the best ever.It screams out quality.best thing ever!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Date published: 2015-08-27
Rated 1 out of 5 by from Useless With a stopped-up toilet and no plunger, I bought this one, beautifully packaged, that turned out to be useless. It may stay clean and dry, but its bell is too flat and shallow, allowing for almost no movement of water when plunging. If it hadn't been packaged, I might have noticed that and not bought it.
Date published: 2015-04-21
Rated 1 out of 5 by from This plunger is worthless... I purchased this plunger yesterday. When I tried to use it, the plunger head would not function, when you push down, the head did not release, so there was not any suction.
Date published: 2015-03-24
  • y_2019, m_2, d_19, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_74
  • loc_en_US, sid_10001_30051_RP092048, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rubbermaid